Emdom H2O Hydration Carrier

Emdom H2O Hydration Carrier

The Emdom H2O Hydration Carrier (MOLLE compatible) is a ruggedly constructed 1000-D Cordura carrier that fits a standard 100 oz (3 liters) reservoir. It has a double zippered reservoir compartment and a front accessory pocket with two zippered openings. It is designed to mount directly to any MOLLE compatible platform (vests / armor / load bearing equipment); or be used as a stand-alone hydration system after installing a pair of removable shoulder straps (coming soon). This mid-size carrier is perfect for your day to day use when a bigger carrier is not needed. Its low profile shape makes it less cumbersome inside a vehicle or in tight environment. Low infrared reflective [IRR] buckles, Mil-spec webbing, zippers, and materials provide an edge on the battlefield and during night ops.

The H2O hydration carrier features full coverage of color / camo matched MOLLE webbing on the front and sides for attachment of various MOLLE pouches, a 4” x 3” MOLLE built-in loop Velcro panel for attachment of unit/identification patches or MOLLE pouches, and four front webbing loops (attach points) for extra tie downs, or to add the carrier to other load bearing systems or rucks. The front accessory compartment is a deep pocket with two zipper openings for easy access of long and short items inside. Long items such as antenna or a spare reservoir can be accessed through the top zipper opening. Small items located at the bottom of the pocket are easily accessed through the lower zipper opening, halfway down. Our research found most operators preferred a deep pocket rather than two small pockets. They had a hard time storing long items in their chest mounted pockets, and they didn’t want to store them inside the reservoir compartment, for fear that the long objects may damage the reservoir.

The reservoir compartment has a rain flap protected double zipper opening. The zipper ends feature double snap security to prevent accidental opening. At the top of the carrier is the elastic covered hydration port, large enough to fit any mouth piece without having to take it apart. Inside the reservoir compartment is a mesh reservoir pocket with 4” wide elastic compression strap for maximum security and compression, a paracord reservoir hanging loop for better weight distribution, a 5” x 5” mesh zipper pocket for hydration accessories (connectors, cleaning tablets and spare bite valve), and a 4” x 4” loop Velcro panel behind the zipper pocket for extra patches and IFF tape storage.

Unique to our carrier is the new Emdom-MM MOLLE attachment system. It is a continuous webbing MOLLE strap with a Velcro fixed ends. Easy to install or detach, it leaves no gap between the carrier and the mounting platform, offering extremely security. No Malice Clips are needed. For stand-alone carry, our carrier has four attachment points at the rear for shoulder strap installation (see below for details). The H2O carrier is available in Mulitcam, ACU, Coyoteish, Sewer Green, and Black. Backed with a lifetime warranty. PLEASE NOTE: Hydration reservoir and the low profile shoulder strap system are not included. The later is now available for separately purchase (See below).

Tactical Advantage:

Two compartment hydration carrier. Size: 15.5" x 6" x 3". Weight: 16 oz. Fit 100 oz (3 liter) reservoir.

Mil-spec material & Lifetime warranty. Genuine DuPont Mil-spec 1000 D Cordura. Genuine Crye Precision Multicam Cordura Fabric. ITW low infrared reflective (IRR) buckles for night ops. Mil-spec YKK zippers, Velcro and webbings. Backed by Emdom's life warranty.

MOLLE compatible, fit all MOLLE compatible vest, armor, rucks, and load bearing equipments.

Stand-alone carry option. Four shoulder strap attachment points at the back. A fully adjustable low profile shoulder strap system is available for separate purchase.

Low profile design: Mid-size pack for day to day use. Easy in and out from vehicle, function well in tight surroundings.

Camouflage matched MOLLE webbings on the front and side.

Max mounting capacity: Full coverage of MOLLE webbing on the front and sides.

Top 4" x 3" MOLLE built-in loop Velcro panel, designed for team patches, IDs, IFF markers, or MOLLE pouch attachment.

Four webbing loops on the front for extra tie-downs, fit split D-rings, paracord, or elastic shock cords.

Front accessory compartment has two zipper openings (top and bottom), easy access to both long and short items inside.

Rain protection: All zippers covered by rain flaps. Hydration port covered by a piece of elastic.

Zipper security: Zipper of the reservoir compartment has a double snap security system to prevent accidental opening.

Hydration port is protected under a piece of elastic. Port is large enough to fit all mil-spec mouth pieces.

Reservoir security: Internal paracord reservoir hanging loop for better weight distribution. Mesh reservoir pocket has an elastic opening, and a 4" wide elastic band for better retention, support and compression.

More storage options: a 5"x 5" mesh zipper pocket (inside the main compartment) for hydration accessories, such as cleaning tablets and extra mouth pieces. Behind this pocket is a 4" x 4" loop Velcro panel for extra patches or IFF marker storage.

Emdom-MM MOLLE attachment system. A continuous webbing MOLLE strap with Velcro fixed ends. Easy to install or detach. No gap between mounting surface and the carrier, offering extreme security. No Malice clips needed.

Water Drainage grommet at bottom, for maritime operations.

Available in Mulitcam, ACU, Coyoteish, Sewer Green, and Black.

Note: Hydration reservoir is NOT included.

Note: Shoulder strap is NOT included, which can be separately purchase.

Top row: 4" x 3" MOLLE build-in Velcro loop panel, ideal for team patch, Identifications, IFF markers or MOLLE pouches. Four webbing loops (attach points) on the front for extra tie downs, fits split D-rings, paracords, or shock cords.
Bottom row: Front accessory pocket has two zipper openings. Top zipper for long items, and bottom zipper for short / small items. All MOLLE webbings are camouflage matched on the front and sides.

Top row: All zippers are covered by rain flaps. Double snap security system at main zipper to prevent accidental openings.
Mid row: Hydration port with elastic cover. Port is large enough for most Mil-spec mouth pieces. Paracord reservoir hanging loop located at the internal top for better weight distribution and support.
Bottom row: Reservoir is stored inside a mesh pocket that has a elastic top rim and a 4" wide elastic retention band, better security and retention.

Top row: 5" x 5" internal hydration accessory pocket. Behind the pocket is a 4" x 4" Velcro loop panel for patches, or IFF markers storage.
Bottom row: E-MM MOLLE attachment system at the back of the carrier, easy to install and detach. No gap between mounting surface and the carrier, offering extreme security . Besides, there are four attachment points for shoulder strap. Drainage Hole at the bottom for maritime operations.

Top: Emdom H2O hydration carrier mounted onto a Khaki Navy SEAL MBSS plate carrier. On the left of the carrier is a Emdom Multicam HABD survival air egress bottle pouch. The user also puts an O POS IFF Blood tape, a triple flash bang pouch, and a signal flare pouch on the carrier.

NEW: Emdom H2O hydration Carrier is now available in Coyoteish, Multicam, ACU, Sewer Green, and Black.